PositionHome > Products > NWAY
 
   
10/100/1000 Ethernet Aggregate TAP Combination TAP
Dual-Link In-Line Aggregation TAP Regeneration TAP
   


10/100/1000 Ethernet Aggregate TAP

These Aggregate TAP solution allows the aggregation of traffic from multiple TAPs or Switch SPAN to multiple Analyzer/monitor port. Our TAP Solution can Aggregating and Regenerating the traffic that allows you to TAP into 10/100/1000 network infrastructure. Our Dual-Power and Fail-over technology can ensure the device does not introduce a point of failure into your Network.

  1. 5 PORT 10/100/1000 Gigabit Ethernet Aggregate TAP 
  2. Each port supports full duplex 10/100/1000M connectivity(half duplex only supported in 10/100M mode) 
  3. Each port support Auto MDI/MDI-X. 
  4. The embedded packet storage SRAM features superior memory management technology to efficiently utilize memory space. 
  5. Supports any kind of packets, ex: 9216 bytes jumbo packet, Error, Jabber, Runts, Long Frame, Short Frame......etc forwarding at wire speed. 
  6. Support Dual-Power supply(Input:100-240VAC 0.5A 47-63Hz, Output:5VDC 2.5A). 
  7. Fail-over circuit is option. 
  8. Rack mount is option. (support 2 TAPs install)
  9. Management, Statistic, any-to-any and Filtering Function is Option. 
  10. DIMENSIONS : 35 x 145 x 205 mm 
  11. Weight : 850g.
  12. All Device are Made in Taiwan.



more Info
download(438KB)

 

Dual-Link In-Line Aggregation TAP

There have more and more environment deploy the HA(High Availability) architecture.  Above model support 2 network Link of 10/100/1000 in-line with this device and aggregate all of these full-duplex traffic into the 10/100/1000 Analyzer port.

**:4G2L1A-P support feature of Fail-Over-By-PASS

Max port traffic output: 1,000Mbps
Max port packet output:1,488,000pps
1U Rack mount can install 2 units.
Operation Temperature: 0ºC to 55ºC
Storage Temperature: -10ºC to 70ºC
Humidity : 10%~95%
Dual Power input: 100-240 VAC, 5V
Dimension: 31 x 145 x 205m 
Warranty: 1 year
Made in Taiwan


more Info
download438KB)

 

 

Combination TAP

Model: 4G4S1A

There have more and more network hosts and switch need analysis the conversion traffic to do the network management job.  Above model support 4 SPAN(mirror) 10/100/1000 port traffic input, aggregate and output to the 10/100/1000 analyzer port.

Max port traffic output: 1,000Mbps
Max port packet output:1,488,000pps
1U Rack mount can install 2 units.
Operation Temperature: 0ºC to 55ºC
Storage Temperature: -10ºC to 70ºC
Humidity : 10%~95%
Dual Power input: 100-240 VAC, 5V
Dimension: 31 x 145 x 205m 
Warranty: 1 year
Made in Taiwan



more Info
download(438KB)

 

 

Regeneration TAP

Model: 2G2S3A

There have more and more application need SPAN traffic to do the analysis job, but almost switch only support one monitor session.   Above model support 2 SPAN(mirror) 10/100/1000 port traffic input, aggregate and regeneration to 3 analyzer port at the same time.

Max port traffic output: 1,000Mbps
Max port packet output:1,488,000pps
1U Rack mount can install 2 units.
Operation Temperature: 0ºC to 55ºC
Storage Temperature: -10ºC to 70ºC
Humidity : 10%~95%
Dual Power input: 100-240 VAC, 5V
Dimension: 31 x 145 x 205m 
Warranty: 1 year
Made in Taiwan



more Info
download(438KB)

 

 

 
 
        RichSmart Copyright © 2020 RichSmart